| thermoplastic |
Two basic types of plastic resins. Thermoplastics are resins that can be reground after molding, and molded again. Thermosets can be molded once only; they tend to be denser materials for special purposes. PVC is a thermoplastic. A PVC valve could conceivably be reground, then molded into a coffee mug. The resin used on a solenoid coil is a thermoset. A good analogy is paraffin wax vs. ...
출처: www.plastomatic.com/glossary.html
|
|---|---|
| thermoplastic |
A polymer which melts or flows when heated. Thermoplastic polymers are usually not highly cross-linked, and act much like molecular solids: low melting and boiling points, high ductile strength.
출처: www.npd-solutions.com/injectmoldglos.html
|
| thermoplastic |
a type of polymer that can be melted and reformed by application of heat.
출처: www.cue-inc.com/urethane-technical/urethane-glossa...
|
| thermoplastic |
A resin or plastic compound that, as a finished material, is capable of being repeatedly softened by heating and hardened by cooling. Examples of thermoplastics are: acetal, acrylic, cellulosic, chlorinated polyether, fluorocarbons, polyamides (nylons), polycarbonate, polyethylene, polypropylene, polystyrene, some types of polyurethanes, and vinyl resins.
출처: www.jmcatalysts.com/pct/marketshome.asp
|
| thermoplastic |
Widely used materials, such as ABS, acrylic, polycarbonate and PVC, which can be melted again and again. They melt when heated to a certain temperature, but harden again as they cool.
출처: www.eupen.com/glossary/glossarypipe.html
|